METAL LEVER TOGGLE SWITCHES

1 455 ₽

Описание

.25" TAB TERMINAL
21 AMP at 12VDC
9 AMP at 24VDC
15 AMP at 125VAC
1/2" panel hole size.

SINGLE POLE--12 VOLT 21 AMPS--HEAVY DUTY

HAS LEVER O' RING SEAL--SILVER CONTACTS
.687 INCH LEVER LENGTH--.500 INCH MOUNTING HOLE
.250 INCH TAB TERMINALS

DOUBLE POLE--12 VOLT 21 AMPS--HEAVY DUTY

HAS LEVER O' RING SEAL--SILVER CONTACTS
.687 INCH LEVER LENGTH--.500 INCH MOUNTING HOLE
.250 INCH TAB TERMINALS

Note: ( ) Refers to Momentary

Eligibilities

Dimensions

Арт.	MPN	Описание	Цена
12-102	12-102	LEVER SWITCH # 12-102	$ 7.55
12-201	12-201	LEVER SWITCH # 12-201	$ 7.90
12-100	12-100	METAL LEVER TOGGLE SWITCHES	$ 5.35
12-200	12-200	LEVER SWITCH # 12-200	$ 7.50
12-101	12-101	LEVER SWITCH # 12-101	$ 6.85
12-104	12-104	LEVER SWITCH # 12-104	$ 8.80
12-204	12-204	LEVER SWITCH # 12-204	$ 7.70
12-103	2FC53-73/TABS	LEVER SWITCH # 12-103	$ 4.85
12-202	2GL51-73	LEVER SWITCH # 12-202	$ 6.75

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

How wide is the double pole version of this switch?

The width of the double pole switches is approximately 3/4".

What is the difference in part numbers #12-202, #12-203, and #12-204?

These are all double pole switches. The difference is in the operation. () means momentary, so 12-202 is ON-ON, 12-203 is ON-OFF-ON, and 12-204 is (ON)-OFF-(ON).

Are these single throw or double throw please?

There is a drop down selection box to first select if you want single pole or double pole, the second box is where you select the model, ie OFF-ON, OFF-(ON), etc

Are these metal lever toggle switches FAA approved for certified aircraft?

No, for certified please consult with your local avionics shop.

What is the difference between simple and double pole?

Single pole option is a switch that controls one path. A double pole switch is a single switch that controls two paths.

Does the model 12-204 switch have .25 quick terminals ?

The model 12-204 has .26 Tab Terminals.

Does the () parenthesis on part number 12-101 that the switch is only ON when holding in the ON position? By releasing does it go automatically into the OFF position? The idea is to use it for a primer and avoid to turn on the primer by activating the switch accidentally.

Correct, The () means the momentary position. The 12-101 is an OFF-(ON) switch. The lever stays in the off position unless it is toggled to the opposite position, and will return to the off position once it is released.

Are these switches PMAded for certified aircraft?

No, these switches do not have FAA Approval.

Are the metal lever toggle switch rated for 12 VDC for single pole ON/OFF?

Yes, the toggle switch is rated for 12VDC.

For the OFF-(ON) momentary switches (P/N 12-101 and 12-201), is the levers OFF (resting) position the same side side as the keyway or opposite side?

The keyway is on the same side as the momentary position.