ECOPOXY CLEAR KIT

14 385
Описание

These Clear Kits are ideal for sealing / clear-coating surfaces such as concrete and wood, as well as for wetting fabrics that require a clear, waterproof finish. Odourless and non-toxic, It can be applied indoors or outdoors without masks or ventilation. This self-leveling kit is applies at approximately 10 mils finish thickness. It provides a durable, light reflective floor with excellent adhesion qualities. It’s easily roller applied.

The Clear Kit is non-shrinking, and resistant to to water, acids, other solvents. It will never peel, flake or chalk when properly applied. Typical use include Warehouse Floors, Aisle ways, Storage Areas, Industrial & Commercial Floors.

Арт. MPN Описание Цена Add to cart form
09-04101
EPCLK10-1.5L
ECOPOXY CLEAR 1.5 LITER KIT
$ 79.75
09-04099
EPCLK10-750ML
ECOPOXY CLEAR KIT
$ 47.95
09-04103
EPCLK10-6L
ECOPOXY CLEAR 6 LITER KIT
$ 244.95
09-04102
EPCLK10-3L
ECOPOXY CLEAR 3 LITER KIT
$ 140.75

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Can EcoPoxy be thinned in order to spray on a surface? If so, what would be compatible to thin it?

This material can be thinned 2% with Denatured Alcohol. The manufacturer does not have any information for a spray application.

Can this ecopoxy be wet-sanded or polished?

Yes it can be wet sanded, but the manufacturer recommends dry sanding. Yes, it can be polished.

Regarding EcoPoxy Clear Kit: What coverage per gallon would you expect on a raw wood substrate? How many coats are typical to get a 10 mil build?

It is approx 100 sq ft per gallon. Normally 2 coats will get you a 10 mil build. The first one just seals the wood.

Are these Ecopoxy clear kits considered hazardous goods for shipping?

Per Vendor: No, they are not hazardous materials.

Is there a pump system available for ecopoxy systems?

They do not offer a ratio pump system, we do offer a counter top adjustable ratio pump, p/n 01-16010 , used with many epoxy systems.

What is the Ecopoxy Clear kit temp range?

EcoPoxy Resin and Clear Hardener should not be applied when surface temperature is above 90 degrees F. or below 60 degrees F.