AC 43.13 1B/2B ACCEPTABLE METHODS

Table of Contents

• Section 1. Materials and Practices
• Section 2. Health and Safety
• Section 3. Inspection
• Section 4. Repairs
• Section 5. Finishing Wood Structures

• Section 1. Practices and Precautions
• Section 2. Application of Dope
• Section 3. Inspection and Testing
• Section 4. Repairs to Fabric Covering

• Section 1. Repair of Light Load Laminate Structures
• Section 2. Metallic Sandwich Secondary Structure Repairs
• Section 3. Transparent Plastics
• Section 4. Windshields, Enclosures and Windows

• Section 1. Identification of Metals
• Section 2. Testing of Metals
• Section 3. Precautionary Methods
• Section 4. Metal Repair Procedures
• Section 5. Welding and Brazing
• Section 6. Welding and Brazing Safety

• Section 1. General
• Section 2. Visual Inspection
• Section 3. Eddy Current Inspection
• Section 4. Magnetic Particle Inspection
• Section 5. Penetrant Inspection
• Section 6. Radiography (X-Ray Inspection
• Section 7. Ultrasonic Inspection
• Section 8. Tap Testing
• Section 9. Acoustic-Emission
• Section 10. Thermography
• Section 11. Holography
• Section 12. Shearography

• Section 1. General
• Section 2. Types of Corrosion
• Section 3. Corrosion Protection Measures for Basic Materials
• Section 4. Corrosion Preventative Maintenance
• Section 5. Visual Corrosion Inspection Guide for Aircraft
• Section 6. Corrosion Removal Procedures
• Section 7. Basic Corrosion Removal Techniques
• Section 8. Aluminum and aluminum Alloys
• Section 9. Magnesium and Magnesium Alloys
• Section 10. Ferrous Metals
• Section 11. Other Metals and Alloys
• Section 12. Plated Parts
• Section 13. Corrosion Proofing of Land Planes Converted to Sea Planes
• Section 14. Handling and Care of Aircraft Recovered from Water Immersion

• Section 1: Rivets
• Section 2. Screws
• Section 3. Bolts
• Section 4. Nuts
• Section 5. Washers
• Section 6. Pins
• Section 7. Safetying
• Section 8. Repair of Control Cables and Turnbuckles
• Section 9. Turnbuckles
• Section 10. Safety Methods for Turnbuckles
• Section 11. Hardware Identification Tables

• Section 1. Engines
• Section 2. Fuel Systems
• Section 3. Exhaust Systems
• Section 4. Repair of Metal Propellers
• Section 5. Inspection of Propellers
• Section 6. Propeller Tracking and Vibration

• Section 1. Inspection and Maintenance of Landing Gear
• Section 2. Hydraulic Systems
• Section 3. Emergency Equipment
• Section 4. Cabin Interior

• Section 1. Terminology
• Section 2. Weighing Procedures

• Section 1. Inspection and Care of Electrical Systems
• Section 2. Storage Batteries
• Section 3. Inspection of Equipment Installation
• Section 4. Inspection of Circuit-Protection Devices
• Section 5. Electrical Wire Rating
• Section 6. Aircraft Electrical Wire Selection
• Section 7. Table of Acceptable Wires
• Section 8. Wiring installation Inspection Requirements
• Section 9. Environmental Protection and Inspection
• Section 10. Service Loop Harnesses (Plastic Tie Strips)
• Section 11. Clamping
• Section 12. Wire Insulation and Lacing String Tie
• Section 13. Splicing
• Section 14. Terminal Repairs
• Section 15. Grounding and Bonding
• Section 16. Wire Marking
• Section 17. Connectors
• Section 18. Conduits
• Section 19. Protection of Unused Connectors
• Section 20. Electrical and Electronic Symbols

• Section 1. Avionics Equipment Maintenance
• Section 2. Ground Operational Checks for Avionics (electrical)
• Section 3. Ground Operational Checks for Avionics (non Electrical)
• Section 4. Avionics Test Equipment