A-790 VERNIER CONTROL - RED

24 825
Описание

The A-790 vernier control has a .078" dia. stainless steel wire core. Both the wire and Teflon™ lined flexible casing may be shortened as required. The Teflon™ liner provides low friction with heat resistance in high temperature areas such as engine compartments. Furnished with FAA-style knobs (Black, Red & Blue). Max. travel: 3-3/8". Stocked in the following lengths (measurement taken from under the panel nut to end of wire with knob pushed in).

Made in USA

Арт. MPN Описание Цена Add to cart form
05-08148
A-790-20-0480
A-790 CONTROL 48" RED KNOB
$ 82.75
05-08196
A-790-20-0960
A-790 CONTROL 96" RED KNOB
$ 89.95
05-08136
A-790-20-0360
A-790 VERNIER CONTROL - RED
$ 82.75
05-08184
A-790-20-0840
A-790 CONTROL 84" RED KNOB
$ 87.75
05-08172
A-790-20-0720
A-790 CONTROL 72" RED KNOB
$ 85.80
05-08160
A-790-20-0600
A-790 CONTROL 60" RED KNOB
$ 87.75

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Are these cables FAA-PMA'd?

No, the cables on this web page are not approved. We do carry one that is approved by the same manufacturer. The part number is A-790-12, and it is approved for some Cessnas.

What is the outside diameter of casing of the A-790 vernier control? In order to use cable safe products.

The outside diameter of the casing is 1/4".

What is the panel mount hole size diameter for the ACS A-790 vernier control?

The panel hole size should be 3/4" in diameter.

What is the diameter of the plastic knob, specified either between the tactile ribs or the complete OD including the tactile ribs?

1.4063" complete OD including tactile ribs.

Is there a physical difference between the approved and non-approved version?

No, there is not.

Is the fine tuning done on the A-790 control by twisting the Handle (like a real Cessna Mixure)?

Yes, it can be fine adjusted by turning the knob.

What is the OD of the outer spiral winding at appliance end on the A-790 vernier control?

1/4" OD.

Can the sheath and cable be trimmed down in length if the old model falls between selectable sizes?

Yes, they can be.

Can the A-790 VERNIER CONTROL solid inner cable be removed from the outer casing so that the casing can be cut, or must the casing be cut with the inner cable in place?

Yes. It can be pulled out completely. There is a small ball bearing that will fall out when you do, make sure not to lose that part.

Is this A-790 control FAA Approved for certified aircraft?

No, this is not FAA Approved. Only the A-790-12 is approved. Please search for that part number on our website for the FAA Approved unit. On that page, it will list applicable models.

Where is the length measured from? Tip of wire to tip of knob?

It is measured from the mounting point at the panel to the wire tip. Full length from the tip of wire to tip of knob is 39" for part # 05-08136 for example.