A-1760 VANS RV CUSTOM CONTROL CABLE

57 225 ₽

Арт.

05-01435

Описание

Specify knob color (black, blue, red), overall length of control (from under panel nut to end of control) and stroke (2-1/4-Inch, 2-1/2-Inch).

Made in USA

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What is the diameter of the threaded portion of the Custom prop control cable at the panel?

The ACS A-1760 control has 3/4-16 mounting threads at the panel. A 3/4" hole would be required to install.

I need the little rubber boot at the rod end of the cable. Do you have that part?

Please see part numbers 05-02633 and 05-02634.

What is the diameter of the solid metal portion of the cable where the carb end of the cable is clamped? Is there a clamp specifically designed to hold the carb end of the cable sheath?

This cable has a bulkhead fitting at the threaded end to secure the housing. The end user would normally fabricate a bracket for their specific application.

The carb end of the cable has a solid metal section that is to be held by the user-fabricated bracket. It is this section I was asking about. What is the diameter of this part of the cable that happens to be about 3/4 long and ABOUT 3/8 in diameter?

The crimped bulkhead threads are 7/16"-20 and 1-1/2" long. You could drill a 7/16" hole in your fabricated bracket for it to be attached.

The photo shows a vernier control knob, is that accurate?

Yes, this display picture is accurate and is up to date.

Do the A-1760 Vans vernier control cables come supplied with the two 7/16 nuts and washers at the hook-up end of the cable or need to order separately?

This cable has the nuts and washers at the bulkhead end of the cable.