A-750 VERNIER CONTROL

27 825
Описание

The A-750 vernier control has a 10-32 threaded shaft for use with a ball point or threaded terminal. Unique ball-socket construction permits the threaded end to swivel 80 degrees in any direction. The casing has a Teflon™ inner liner for low friction and heat resistance in high-temperature areas such as engine compartments. Furnished with FAA-style knobs (Black, Red & Blue). Travel: 3-3/8". Wt. 1 lb. (4'). Stocked in the following lengths (measurement taken from under panel nut to end of threaded shaft with knob pushed in).

Made in USA

Арт. MPN Описание Цена Add to cart form
05-07760
A-750-10-0600
A-750 CONTROL 60" BLACK KNOB
$ 97.75
05-07836
A-750-20-0360
A-750 CONTROL 36" RED KNOB
$ 92.75
05-07884
A-750-20-0840
A-750 CONTROL 84" RED KNOB
$ 99.75
05-07960
A-750-30-0600
A-750 CONTROL 60" BLUE KNOB
$ 96.75
05-07748
A-750-10-0480
A-750 CONTROL 48" BLACK KNOB
$ 93.85
05-07796
A-750-10-0960
A-750 CONTROL 96" BLACK KNOB
$ 99.95
05-07872
A-750-20-0720
A-750 CONTROL 72" RED KNOB
$ 96.75
05-07948
A-750-30-0480
A-750 CONTROL 48" BLUE KNOB
$ 93.75
05-07996
A-750-30-0960
A-750 CONTROL 96" BLUE KNOB
$ 99.75
05-07736
A-750-10-0360
A-750 VERNIER CONTROL
$ 92.75
05-07784
A-750-10-0840
A-750 CONTROL 84" BLACK KNOB
$ 99.75
05-07860
A-750-20-0600
A-750 CONTROL 60" RED KNOB
$ 96.75
05-07936
A-750-30-0360
A-750 CONTROL 36" BLUE KNOB
$ 92.75
05-07984
A-750-30-0840
A-750 CONTROL 84" BLUE KNOB
$ 97.75
05-07772
A-750-10-0720
A-750 CONTROL 72" BLACK KNOB
$ 97.75
05-07848
A-750-20-0480
A-750 CONTROL 48" RED KNOB
$ 93.90
05-07896
A-750-20-0960
A-750 CONTROL 96" RED KNOB
$ 99.75
05-07972
A-750-30-0720
A-750 CONTROL 72" BLUE KNOB
$ 97.75

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Are these A-750 vernier controls FAA Approved?

No, to install these on a certified aircraft you will need to file a 337 Field Approval. The only ACS controls that are FAA approved are A-790-12 (red knob) and A-800-12 (black knob) and they are only approved for certain Cessna models.

What size hole in the panel is required for installation of the A-750 Vernier Controls?

A-750 cables require a 3/4" hole in the panel for installation.

What is the outer casing diameter of the A-750 so I know what size of cable safe to order?

The A-750 outer housing is 1/4" O.D.

Are these A-750 throttle controls useable on Rotax powered aircraft?

No, these are not useable on dual carb Rotax engines.

Is the A-750 suitable for use as a throttle control on experimental aircraft?

This would work as long as your application requires a 36" vernier style control with a 10-32 threaded end.

Who makes this A-750 vernier control? What is the housing made of?

ACS Products makes these controls. The housing is a teflon inner lined, wound spring steel wire.

Is the construction the same between this A-750 and the FAA approved A-790 controls?

Both a A-750 and A-790 have use the same housing, but are not constructed the same. The A-750 has an inner cable with a 10-32 threaded end, and the A-790 has a .078" inner wire, which is also the end of the cable.

FAA certified engine control cables have a uniquely shaped knob style associated with the color and function of the knob. Black is throttle, red is mixture and blue is prop with their corresponding knob shapes. Do these knobs have the same unique shapes corresponding to the color selected?

Yes, the different colors will have the different shapes associated with that color. Black is throttle that is smooth without any notches. Red is mixture with thin notches. Blue is prop with thicker notches.

How is the length measured on the vernier throttle cable? Is it from the top of the knob to the end of the internal cable or just the outer cable length?

It is measured from the end of the inner cable, to the flat part behind the knob where it is secured against the panel.

Can I order the A-750 Vernier Control in a custom length? Also, what is the minimum radius this cable can be bent?

Yes, the A-750 can be ordered in custom length. Uou can keyword search "Custom ACS Controls" on our website and click the first result. There you can select your options for your custom cable and place the order. Recommended minimum bending radius for all controls is 5" (never less than 3").

If used for mixture control, can the A-750 control be fine tuned by turning the knob?

Yes, the A-750 vernier control can be fine tuned by turning the knob.

How is the A-750 Vernier Control Cable different from the A-1760 Vans control cable? They look the same. Are the cable end fittings the same? Are they both equipped with lock washers and nuts and fit the same mounting holes at both ends? All though not shown in your pictures, arent both cables covered with a high temp material through out it length?

The top end/ knob end is the same, but the mounting end is not. The A-750 has a notched fitting and the A-1760 has a bulkhead fitting. The A-1760 Vans has a shorter stroke.

Can the knobs be replaced on these A750 controls? Specifically the mixture and prop controls..

The knobs on these controls are not designed, or intended, to be removed by the end user.

Can I shorten the A-750 control (if found too long during installation)?

No, these cannot be shortened.