CAMLOC 2600 WING STUDS

3 570
Описание
2600/2700 STUD LENGTH SELECTION
Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness of the material P to which the stud assembly is attached, the material F to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.

P (panel thickness)..................... .062
F (frame thickness................... + .062
GRIP (total thickness).............. = .124


STUD SELECTION TABLE
Using 212-12 Receptacle
Total Grip Thickness
Use 2600
Use 2700
.021-.059
2600-1
2700-1
.060-.089
2600-2
2700-2
.090-.119
2600-3
2700-3
.120-.149
2600-4
2700-4
.150-.179
2600-5
2700-5
.180-.209
2600-6
2700-6
.210-.239
2600-7
2700-7
.240-.269
2600-8
2700-8
.270-.299
2600-9
2700-9
.300-.329
2600-10
2700-10
.330-359
2600-11
2700-11
.360-389
2600-12
2700-12
.390-.419
2600-13
2700-13
.420-.449
2600-14
2700-14
*4002-G grommet requires .090" minimum grip.


2600, 2700 SERIES RETAINING WASHER
Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.
PN 2600-SW-2
$0.78
PN 2600-LW
$0.29

2600, 2700 SERIES RETAINING WASHER
Rivet Holes
2600, 2700 Series Part No.
Price
Plain
212-12N
$2.72
Countersunk
212-12ND
$4.35
Арт. MPN Описание Цена Add to cart form
2600-5W
2600-5W CAMLOC CAD WING STUD
$ 16.85
2600-4W
2600-4W CAMLOC CAD WING STUD
$ 11.90
2600-5SW
1126014-5
2600-5SW SS CAMLOC WING STUD
$ 11.90

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Вопросы отсутствуют.