CAMLOC 2600 STUDS

645
Описание
2600 STUD LENGTH SELECTION
Total material thickness “G” consists of the thickness of all materials to be fastened. This must include the thickness of the material “P” to which the stud assembly is attached, the material “F” to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.

P (panel thickness)..................... .062
F (frame thickness................... + .062
GRIP (total thickness).............. = .124


STUD SELECTION TABLE
Using 212-12 Receptacle
Total Grip Thickness
Use 2600
.020-.059
2600-1
.060-.089
2600-2
.090-.119
2600-3
.120-.149
2600-4
.150-.179
2600-5
.180-.209
2600-6
.210-.239
2600-7
.240-.269
2600-8
.270-.299
2600-9
.300-.329
2600-10
.330-359
2600-11
.360-389
2600-12
.390-.419
2600-13
.420-.449
2600-14


2600, 2700 SERIES RETAINING WASHER
Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.
2600, 2700 SERIES RECEPTACLES
Rivet Holes
2600, 2700 Series Part No.
Plain
212-12N
Countersunk
212-12ND
Арт. MPN Описание Цена Add to cart form
2600-2
1126000-2
CAMLOC FASTENERS 2600-2 STUDS
$ 4.35
2600-6
2600-6
CAMLOC FASTENERS 2600-6 STUDS
$ 2.15
2600-11
2600-11
CAMLOC FASTENERS 2600-11
$ 5.95
2600-1S
1126007-1
CAMLOC FASTENER 2600-1S
$ 11.50
2600-6S
CAMLOC FASTENER 2600-6S
$ 5.75
2600-10S
CAMLOC FASTENER 2600-10S
$ 12.50
26S8-4
26S8-4
CAMLOC FASTENER 26S8-4
$ 2.45
26S8-8
26S8-8
CAMLOC FASTENER 26S8-8
$ 2.80
2600-4S
BACS21Y4C
CAMLOC FASTENER 2600-4S
$ 3.95
2600-1
2600-1
CAMLOC 2600 STUDS
$ 6.60
2600-5
CAMLOC FASTENERS 2600-5 STUDS
$ 2.15
2600-10
2600-10
CAMLOC FASTENERS 2600-10 STUDS
$ 6.55
2600-14
2600-14
CAMLOC FASTENERS 2600-14 STUDS
$ 7.90
2600-5S
2600-5S
SS CAMLOC FASTENER 2600-5S
$ 11.55
2600-9S
CAMLOC FASTENER 2600-9S
$ 5.50
26S8-3
26S8-3
CAMLOC FASTENER 26S8-3
$ 2.45
26S8-7
CAMLOC FASTENER 26S8-7
$ 2.85
2600-9
2600-9
CAMLOC FASTENERS 2600-9 STUDS
$ 6.50
2600-4
CAMLOC FASTENERS 2600-4 STUDS
$ 2.28
2600-8
CAMLOC FASTENERS 2600-8 STUDS
$ 3.80
2600-13
CAMLOC FASTENERS 2600-13 STUDS
$ 4.90
2600-3S
2600-3S
CAMLOC FASTENER 2600-3S
$ 5.50
2600-8S
2600-8S
CAMLOC FASTENER 2600-8S
$ 5.35
26S8-2
CAMLOC FASTENER 26S8-2
$ 2.90
26S8-6
26S8-6
CAMLOC FASTENER 26S8-6
$ 2.75
26S8-10
26S8-10
CAMLOC FASTENER 26S8-10
$ 6.50
2600-3
2600-3
CAMLOC FASTENERS 2600-3 STUDS
$ 2.25
2600-7
CAMLOC FASTENERS 2600-7 STUDS
$ 2.50
2600-12
1126000-12
CAMLOC FASTENERS 2600-12 STUDS
$ 5.35
2600-2S
2600-2S
CAMLOC FASTENER 2600-2S
$ 6.95
2600-7S
2600-7S
CAMLOC FASTENER 2600-7S
$ 5.40
26S8-1
26S8-1
CAMLOC FASTENER 26S8-1
$ 6.60
26S8-5
CAMLOC FASTENER 26S8-5
$ 2.48
26S8-9
26S8-9
CAMLOC FASTENER 26S8-9
$ 4.35

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
What material are 2600-8 and 212-12N made of? Are they stainless steel? Thanks.

No, they are not stainless steel. Both 2600-8 and 212-12N are yellow cadmium plated steel.

What are the S dimensions of 2600-4, 2600-5, and 2600-6? I have one of them but I don't know which it is. I know it fits correctly and I can most easily measure this stud length S.

This is the formula to figure out the S dimension:

S= .73 + (.03 x Dash No.)

Example: 2600-4 S=.73 +(.03 x 4) , stud length is .85"

Are the 26S8-X series of Studs compatible with the 212-12ND and 214-16ND Receptacles?

No, they can not be used with the 214-16ND units. The 214-16ND require the 4000 series studs. The 212-12ND does work with the 2600 series studs.

What is the difference between the 2600 studs & the Camloc C-spec 2600 studs? Are they interchangeable?

Camloc is manufactured by Alcoa, and C-Spec is manufactured by Milspec Products, but are interchangable. The stud head appearance are slightly different, but function the same.

Do the cad plated 2600s have a spring that requires less force than the stainless steel version? Im concerned about the force required to lock it in an oil door application where the door and flange are aluminum.

The spring force is not listed in the Camloc information. We have no records of any difference in the spring strength either.