BATTERYMINDER® 244CEC1: 24VOLT 1/2/4 AMP BATTERY CHARGER / MAINTAINER / DESULFATOR
54 447
₽
Арт.
11-14191
Описание
Note: Not for use on aircraft batteries. For aircraft battery chargers (ie Concorde, Gill, etc), see first 3 part numbers in Alternate Items tab.
BatteryMINDer Model 244CEC1: Don’t just charge your batteries...Condition them! The most advanced series of Battery Charger-Maintainer-Desulfators that BatteryMINDer has every offered using SmarTECHnology™. Users can now determine the level of charge remaining in their battery, and if weak and in need of replacement, before going bad. In addition, units test for weak cells and will recover weak or severely discharged batteries that other chargers would reject.
Not for Aviation
BatteryMINDer Model 244CEC1: Don’t just charge your batteries...Condition them! The most advanced series of Battery Charger-Maintainer-Desulfators that BatteryMINDer has every offered using SmarTECHnology™. Users can now determine the level of charge remaining in their battery, and if weak and in need of replacement, before going bad. In addition, units test for weak cells and will recover weak or severely discharged batteries that other chargers would reject.
Not for Aviation
Features
- All BatteryMINDers are regulated and will not overcharge, no matter what amp selection you make. It is just a matter of how fast you need to charge the battery.
- If you know the battery is charged and in good shape use the 1 Amp setting.
- If you are charging a large deep cycle battery or more than one battery than use 2 Amp setting.
- You will probably use the wet/AGM/sealed selection most of the time. Use the Odyssey selection on all named Odyssey batteries at the 4 Amp setting.
Eligibilities
Benefits
- Guaranteed to never overcharge/undercharge. (33°F to 130°F)
- Push-Button Selection for ALL battery types and charge rates.
- 100% Full - Time U.S. Patented Pulse-type Desulfation keeps battery free of sulfate or dissolves sulfate completely in older batteries.
- Detects and rejects batteries with bad cells.
- Maximize battery life and capacity, recovers weak batteries.
- Diagnoses battery’s condition / state-of-charge.
- Recovers weak or deeply discharged batteries: including but not limited to flooded filler cap, maintenance-free, valve regulated lead-acid (VRLA), sealed lead-acid (SLA), starter, deep cycle and hybrid.
- Maintain up to 8 batteries at a time. (requires BatteryMINDer® Y-Connector Accessory 210-AY)
- Auto-Restart after power failure.
- Intrusion protected from water and dust per IEC STANDARD IP65.
- Bad cell detection with auto-shutdown.
- Very high efficiency. California CEC Approved.
- Automatically detects input AC power.
- ECO-mode with hi-efficiency / low power consumption.
- Ambient temperature compensation. Built-in temperature sensor automatically adjusts charge rate to ensure full-charge. (as low as 0°F or as high as 130°F)
- 18 LED indicators show state-of-charge and important status mode / battery condition. Rugged, vibration-resistant construction.
- Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.
- Not for lithium, nickel–cadmium (NiCad), nickel–metal hydride (NiMH) or aircraft batteries.
Documents
Parts per assembly
In The Box
- 1 - Model 244CEC1 Charger-Maintainer-Desulfator
- 1 - 6' AC cord, 6' DC cord with quick connector (SAE)
- 1 - Auto-Temp Compensation Sensor (installed)
- 1 - Battery Clip Cord Set with Quick Connector and 15A replaceable fuse
- 1 - 2' Ring Terminal Cord Set with Quick Connect
- 1 - Ring Terminal Assembly and 15A replaceable fuse
Отзывы Оставить отзыв
Вопросы и ответы
Вопросы отсутствуют.
Отзывы ещё не добавлены