ELECTRONICS INTERNATIONAL P-110 EGT/TIT PROBES

26 385 ₽

Описание

P-110 Probes including: Standard & Fast Response with or without 6ft lead - Hose Clamp type

The basic difference between the P-110R (robust) and the P-110F (fast response) is the physical diameter of the probe. The P-110F measures .125" and the P-110R measures .187". The smaller diameter allows for a faster responding signal. Additionally, the depth of the probe can be adjusted with the P-110F as it uses a tapered ferrule to secure the probe. The P-110R uses two clips to secure the probe to the clamp.

Арт.	MPN	Описание	Цена
10-00377	P-110-XCO-6-F	EI P-110-F EGT TIT PROBE FAST RESPONSE CLAMP W/ 6 FT CABLE	$ 134.95
10-00376	P-110-F	EI P-110-F EGT TIT REPLACEMENT PROBE FAST RESPONSE CLAMP	$ 87.95
10-01591	P-110-R	ELECTRONICS INTERNATIONAL P-110 EGT/TIT PROBES	$ 87.95

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

how big is clamp on egt probe P-110?

The diameter of the P-110 EGT clamp is 3 inches without being tightened.

What type of connectors does the Electronics International P-110 EGT/TIT Probe have?

The Electroinics Internatial P-110 EGT/TIT Probe has two wires (yellow and red) which must be stripped 3/8" for proper overlap to the OLC-1 Overlap connectors which are provided with the probe.

Is P-110 EGT/TIT probe grounded or ungrounded?

Per EI, the The P-110 EGT/TIT probe is ungrounded.

The P-110 gives two option: 1) Standard no lead 2) 6' lead Does the #1 option come with the 14.5 lead?

No, the standard #1 version, part number 10-01591 does not come with any leads attached.

Are these EI P-110 EGT / TIT probes type K or J?

These are Type K ungrounded.

I have an older egt from EI. Would these probes work?

Yes, these EGT probes are compatible with all series EI EGT gauges.

What is the ohms range?

Per the mfg.- there is not specific ohm range for this probe. This probe is a type k thermocouple with a nominal reading of under 10 ohms. If the probe has failed, the ohm reading will show open.

Is the P 110 R standard probe available with leads?

Yes, part # 10-01591 has an option to add the lead. Please contact avionics sales to process the special order.

Which of the EI P-110 probes will suit as replacement for a failed EGT probe on EI UB-16 6 cyl system?

Yes, these are compatible.

What is the length of the FAST RESPONSE P-110-F - EGT/TIT Probe?

Part # 10-00377 is the probe plus a 6 foot lead.

What is the minimum exhaust pipe diameter for this clamp?

The minimum exhaust pipe diameter for this clamp is 1 inch per the manufacturer specification sheet.