STAINLESS STEEL VHF ANTENNAS FOR HOMEBUILTS

12 885 ₽

Арт.

11-00648

Описание

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Is the Stainless VHF Antenna a comm ant? Does vhf mean comm also. I need one for a kit plane radio. The radio is a dynon.

The Stainless VHF Antenna for homebuilts is a Non-FAA approved comm antenna and will work when properly connected to a 118–136 mHz range comm Radio.

What is the length of the 90 degree antenna from the 90 degree bend to the tip?

The length of 11-00648 is approximately 19-1/2".

What is the connector on the homebuilt antennas? A BNC or a stud?

This antenna is attached to the coax cable using two delron nuts.

Is there any ground plane required for this antenna?

Yes, the height of the antenna should be the diameter of the ground plane.

What is the diameter of the whip antenna?

The diameter is 5mm

What are the heights of these antennas above the ground plane? Also, please clarify how they are mounted.

Please review the installation section on the webpage. These are mounted on the bottom of the plane and they are roughly about 4 inches tall.