SWIFT FUEL SENDER 48" 1/8 NPT W/ ALARM 0-5V OUTPUT

41 025
Арт.
10-06665
Описание
SWIFT FUEL SENDER 48" 1/8 NPT W/ ALARM 0-5V OUTPUT

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
For the Falcon FP-012-5 fuel sender, how much does it protrude above the surface of the fuel tank when installed?

It is about 1 inch but you can now refer to the Documents Tabs on this web page for more specifications.

Will the Falcon Senders give you the same reading if you use both 100LL & auto fuel from time to time?

Per the manufacturer, this will work as long as you are just using 100LL and automotive fuel.

I have a new Falcon FP-24-5 Sending unit. My question is can it be cut down? My tank is 20" tall.

Yes, part number 10-03421 can be cut back up to 12".

Can the FP-012-5 12 be shorten to 9"?

Yes, The FP-012-5 (10-03419) can be cut back up to 6 inches.

Is it possible to use this sender with a 24 volts aircraft?

Yes, you must cut the jump wire when using a 24V system.

Can these Falcon senders be mounted to the bottom of a fuel tank?

Yes, please refer to the installation instructions for more information.

Can the FP-012-5W 12 inch also be shortened to about 10 inches?

Yes, the probe can be shortened no more than 6". The probe will need to be re-calibrated if cut. The unit comes with installation and calibration instructions.

Can you verify that this comes with the mounting hardware shown?

Yes, these senders ship with the required hardware.