AIRTAC-3 CANISTER

233 100 ₽

Арт.

01-01620

Описание

Airtac 3 is a spray adhesive designed for temporary bonding. It can be used to hold dry materials on contours and vertical surfaces. This product is ideally suited to resin infusion applications for holding plies, release films, peel plies, and infusion mesh in place until the vacuum bag is secured. Airtac 3 has a fine pebble spray pattern which reduces airborne material. This reduces overspray and user exposure.

Features

Application

Product can be applied to one or to both bonding surfaces. Ensure surfaces are clean and free of FOD, grease, oil, wax, etc. For the best results surfaces should be between 50-86°F (10-30°C).

Use with adequate ventilation. Shake aerosol well before use.

Spray 6-10 inches (15-25 cm) away from the surface at 90° to the surface, applying an event coat. Allow the adhesive to tack off until there is no transfer when touched.

Join surface and press firmly together.

Notes:

Consult SDS prior to use. Do not store at temperatures over 122°F (50°C). Avoid exposure to sunlight. Do not store directly on concrete floor.

Eligibilities

Benefits

Excellent tack hold dry materials for faster vacuum bagging.
More accurate material placement for infusion setups and better quality laminates.
Less toxic and less airborne material with pebble spray pattern for safer application.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Вопросы отсутствуют.