WEST SYSTEM SIX10™ THICKENED EPOXY ADHESIVE CARTRIDGE - 190 mL

Epoxy bonds incredibly well to woods, fiberglass materials, metals, and concrete, but it is typically a two-part system that requires mixing cups, stir sticks, pumps, fillers, and other equipment and can be intimidating to some users. West System has always aimed to make using epoxy easier; Six10® is the result of this pursuit and effectively takes the intimidation out of bonding with epoxy.

Six10® uses a unique tube with separate chambers for epoxy resin and hardener. As both components exit the tube they mix in a static mixing nozzle and are ready for application as they exit the nozzle opening; simply apply epoxy as you would caulk. Six10® has a working time of 42 minutes (within the static mixer) so it can be used for a wide variety of projects. The epoxy is pre-thickened to prevent sagging during the curing process. As the epoxy is mixed or spread, it will thin slightly and can be used to wet out moderate weight fiberglass or carbon fiber. The initial cure is achieved in 5-6 hours.

If you only need a little amount of epoxy, squeeze out what is needed then remove and dispose of the static mixer and cap the tube. The separation of the resin and hardener allows Six10® to be stored for later use. Additional static mixers can be purchased separately in sets of two or by the dozen for later use.

Remove some of the stress of working with epoxy by using Six10® cartridges with a static mixer and caulking gun convenience for your next bonding project.