Y-TYPE SHOULDER HARNESS COMBINATION

Depending on the aircraft there are different ways this can be installed. One way, if you have a head bar, you can mount this around a tube above the head bar. Another way is you can drill a hole in the spar and use a triangular fitting (does not come with harness) along with lubing a 3 bar slide (comes with harness) and put everything together. With each aircraft it may be different, so different hardware may need to be purchased depending on the application.

Per the manufacturer: You would use the existing hardware that was on your origional seat belt harness.

These harnesses are FAA TSO Approved but not STC'd for specific aircraft types. You will need to verify with your A&P that these can be installed in your model/make.

These belts only adjust at the buckle on one side only.

These belts are tagged with FAA-PMA on the label.

The longest length on the shoulder harness is 79 and the longest length on the seat belt is 62.

The harness comes with 1 3 bar slide and the belts come with 2 3 bar slides.