CONTROL MOUNT

4 350 ₽

Описание

SLOTTED BRACKET CONTROL MOUNT (PN 10465)
Notch of end fitting locks into slot of bracket to secure control. Steel Construction. Includes 1 bracket.

CLAMP STYLE CONTROL MOUNT (PN 10464)
Protruding finger in clamp holds control in position. Two-piece steel clamp and base.

Made in USA

Note: These are made to be used for Aircraft control cables.

Арт.	MPN	Описание	Цена	Add to cart form
10465	10465	CONTROL MOUNT	$ 21.90
10464	10464	CLAMP STYLE CONTROL MOUNT 10464	$ 14.50

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Will your mount 10465 work with the A-700 and A-770 control cable?

The mount will work on the A-770 control, but not the A-700. The mount will work with a 10-32 threaded control, not the solid wire end control.

Will 10464 work with control cable 05-14200?

No, these two will not work with each other as the dimensions of P/N# 10464 is .385" ID and .345" Height. The diameter of the cable housing for P/N# 05-06930 is .188" in diameter.

is there a dimension on the 10464 hole width?

The ID (width) is .385".

Will the 10465 work on clamping a A930 push pull cable?

This will not work as P/N#'s 10464 & 10465 are for the swiveling 10-32 end controls.

What is the length and width of p/n 10464?

Approximately 1-1/4" length x 1/2" width.

What is the fastener hole diameter for PN 10464?

The fastener hole diameter is .195". This will fit a #10 or 10-32 threaded bolt.

What is the thickness of the mount and back plate of 10464?

The flat base is approx. .068", and top mount material is approx. .058".

What is the hole spacing between the 6 holes on the 10465 bracket?

|Measured as pictured in the photo, they are .40" center to center when measured left to right and .50 center to center when measured top to bottom.