AVTEK BONDING AND
GROUND KIT

• Do your Panel Instruments Bounce and become erratic?
  
• Does your Starter turn your Engine SLOWLY and
  you have a new fully charged battery?
  
• Do you see an ugly corroded Battery Posts soon after you clean the Post?

Your aircraft operates on D/c Direct/Current...Aluminum is a perfect metal for "Anode/Cathode" environment. Corrosion loves The Cathode side which is the Airframe Negative-Side of the Battery Current Flow.

The Negative side where corrosion develops creates "Resistance" this resistor on the ground can be anywhere from 1 Ohm to Infinity...This resistor creates a "Voltage-Drop" which shows up as Intermittent Radios and other Panel Gages.

When the Resistive Corrosion is developed at the Starter...a Voltage Drop is created causing insufficient voltage/amperage... ...The result is slow turning during starts. Mechanics miss-diagnosing the problem and a NEW Starter is purchased needlessly.

To compound the aggravating problem, it takes years for these and other symptoms to surface. Whereas when a Spark-Plug or Magneto fails those failure-symptoms shows-up immediately.

Kit includes:

• FAA-APPROVAL
  
• Three (3) Jumper One for the panel, starter and your battery...and Aluminum Fasteners
  
• DVD step by step how to Power-Point Presentation
  
• Sealant