EPL2 WING TIP LIGHT SET

This is not a replacement for the EPL, but the next generation of the 12 Volt EPL characterized by a interaction between high performance-LED's and special reflectors.

Three 12 Volt Power-Beams generate a wide visible light via a cleverly devised angle system of reflectors.

The integrated cooling plate leads off the excess head of the high performance LED's. The EPL is made of a high-optic, scratch resistant plastic module. The entire control element is integrated into the ACL module where the ACL's dimensions determine the required space. The EPL has a brilliant green and red light with modulated beacon impulse for better perception. It has a defined angle of light of 110 in compliance with the regulations of general aviation.

The wingtip lights are prewired to allow easy connection to a 2-lead cable of minimum 0.4 mm cross section. Flanges allow simple fixture. In addition, it can be affixed to the fuselage or rudders by means of a silicon adhesive. An instruction manual and the shrink tubing required for the assembly are included in the EPL package.

Synchronisation cable:
The EPL has an additional yellow synchronisation cable to synchronise the left and right EPL. However it is not mandatory to connect the synchronisation cable. The EPL will also work without any
problems if the cable is not connected. Is the snychronisation cable not connected (asynchronous mode), the ending of the yellow cable has to be isolated.