E-Z HEAT 912 ENGINE PREHEATER

49 155 ₽

Арт.

07-01860

Описание

The E-Z Heat Engine Preheater system fits the Rotax motors and many other light sport aircraft on the market today. The system consists of two heater pads connected with a common "Light Bright" power cord. Installation is easy by peeling and sticking a pad on both the sump and on the oil tank to assure the engine gets the proper amount of heat.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

Re E-Z Heat 912 Engine Pre-heater: How many watts are the two heating pads in total?

Per the supplier: 300 Watts total.

On my RV-12 will there be specific instructions on where to place the elements on the engine and oil tank? If I put the heater system on a timer, how much time before engine start is required to bring the oil in the external tank up to the heater temperature?

Per Vendor: There are instructions but you can tell him one pad goes on the oil tank (bottom, you can wrap it around the bottom below the oil level) and one goes on the engine case ( also on the bottom ). They just have to be within the oil line. It usually takes 3 to 5 hours to completely warm the engine but it depends on the outdoor temperatures.

Can this unit be plugged in 24 hours / 7 days a week?

Yes, you can as long as you can fly once or twice a week.

What is the dimensions of the heating pads?

There are two pads and they each measure 6" x 1.5"

How long does this unit take to heat a 3-4 qt sump or oil tank to safe engine start operating levels?

It would depend on the ambient air temp and the aircraft temp but usually 3 hour or so. 5 hours max if its really cold.