ELECTRONICS INTERNATIONAL OPT1 OIL PRESSURE AND OIL TEMP PRIMARY GAUGE 2-1/4 TSO

149 700 ₽

Арт.

10-25205

Описание

These Digital/Graphic Instruments are solid state and hold their accuracy over time and a range of environmental conditions. The colorful Graphic Analog display emits green, yellow, or red light enabling the pilot to spot problems immediately without interpreting a needle. The Digital display constantly provides an exact indication of each instrument function. Gauges mount in 2-1/4" instrument holes. These instruments (except fuel level) are STCd & TSOd for certificated aircraft.

OPT-1 Oil Temperature/Pressure

The OPT-1 is a dual instrument which features dual 90 degree graphic analog displays. Select to view pressure or temperature on the digital display using the toggle switch on the front panel. OTP-1 measure to 1 PSI and oil temperature to 1°F on the digital display. It incorporates an external pressure transducer and temperature probe that are mounted in the engine compartment. The instrument is backlit for night operation and operates on 12 or 24V system. Oil pressure range is 25-100 PSI and oil temp. range is 65°-240°F. Wt. 22 oz.

E.I. products include all documentation and certifications

Documents

10-25205worksheet.pdf

optmanual.pdf

optstc.pdf

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What is the part number for a new pressure sender for the OPT-1 EI gauge?

Part number 10-01202 is the replacement pressure sender.

what comes with the OPT-1? Is this only the head unit? Does it also include all the wires and the transducer?

Per Electronics International, the OPT-1 comes with the unit, all the wires, transducer and temperature probes needed for installation.

Just to be clear, does the OPT-1 come with both the temperature AND Pressure sensor? I understand that the transducer and wiring harness is standard?

Per Electronics International, the OPT-1 comes with the unit, all the wires, transducer and temperature probe needed for installation. The harness is a standard 6' to probes 3' to power.

What is the part number for a new oil temp probe?

10-00302

Are the mounting screws and nuts included with the gauge?

Yes, this will come with all hardware needed for installation.

10-25205 Are the oil temperature probe, the pressure sender and the wires included with the gauge?

Yes, The probes are included with this gauge.

Can the OPT1 oil temp be displayed in Degrees Celsius?

Per the manufacturer, this can be done but must be requested at time of order.

My OPT-1 is showing zero pressure, I probably need a new transducer. Do you have a part number?

Per the installation manual you can use part # 10-01202.

I would like to install the OPT-1 in a pusher so I need 12 of wire to the sensors and the standard 3 for power. How do I order the unit with longer sensor wires?

When placing the order, please indicate the length of the leads you require in the special instructions box, that will be noted on the order. We will then provide a special order for you.