G-8 WASHERS

87 ₽

Арт.

04-01989

Описание

A No. 8 washer with the same O.D. as a No. 10 (0.75). Great for those oversize holes in fairings. Unlike the No. 10 washer with a No. 8 screw, these washers will tighten down on the fairing (not bottom out on the cone) thus providing the proper "clamp up" between the fastener and the fairing.

The G-8 washers are Made in the USA from 304 (1/2 hard) Stainless Steel and are machine tumbled for a shiny finish.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What is the OD of the G-8 Washers?

The outside diameter of the G-8 Washers is 0.75".

What is the overall height of the G-8 washer? What is the nominal thickness of the flange?

Per the supplier: overall height is approximately 0.090", thickness of material approximately 0.020".

What is the countersink angle for these G-8 washers?

These have a 100 degree countersink.

What size, diameter, screw do these G-8 accept?

These washers are designed to be used with #8 countersunk screws, and the O.D. of the washer is as large as a #10 washer.