NUT SAF-T-BLOK
11 550
₽
Арт.
12-15349
Описание
Designed to enable safety wire holes to be drilled through the head of bolts or through nuts, across the diagonal. Designed to accept up to 3/4 inch diameter nut. Easy to use. Nut Saf-T-Blok requires that the nut or bolt be placed into the "V" groove, tighten down the holding screw, drill and deburr.
Note: Used for HEX Bolts: AN/JIC Fittings.
Features
- Easily drill safety wire holes in bolt heads and nuts across the diagonal.
- Accepts up to 3/4 inch diameter nuts or bolt heads.
- Simply place the bolt head or nut into the vee groove, tighten down the holding screw, then drill and de burr.
- 1/16 inch or a 5/64 inch cobalt drill recommended
Отзывы Оставить отзыв
Вопросы и ответы
Вопросы отсутствуют.
Отзывы ещё не добавлены