J.P. INSTRUMENTS EDM-730 ENGINE MONITORING SYSTEM

467 700 ₽

Описание

The EDM-730/830 revolutionizes engine monitoring by the integration of brilliant full color graphical LCD display with the extremely popular EDM 700/800 series functionally and yet reduces the package size to the smallest on the market! The EDM-730 packs more features, functionality, and information onto its large full color screen than any other monitor available and features larger characters for easier reading. Oil pressure has also been added to the entire EDM series line. Mounting is a breeze due to its standard 3-4/8" format, and because it can be mounted in either portrait or landscape orientation, thus accommodating virtually any panel configuration. Depth behind the panel is an amazing 2-1/2". The unit is "Plug and Play" compatible with existing EDM-700/800 units.

Bayonet & Adapter: This option includes 3 bayonet probes and 1 adapter allowing existing CHT probe to gauge to receive data so both the existing CHT gauge and the EDM 730 can display the CHT info at the same time.

Download dimension profile here.

Full Color LCD Display:

More Graphics
Large digits for easy reading.
Full color parameter range markings.
Annunciation of exceedances.
More information without "page swapping"
FAA STC/TSO approved.

Package Form Factor:

Standard 3-1/8" Mounting from the front.
Face is offset from center to better fit in spaces where other equipment is currently located.
Can be mounted in four different face orientations to satisfy tough mounting scenarios.
Depth is nearly the same as the height of a business card, 2.5".
Plug and play compatible with the JPI EDM-700/800 harnesses for easy upgrade.
Front mounted USB jack for easy software upgrades and data downloads.

Features

User programmable engine parameters.
Percent Horsepower.
Rich of peak or lean of peak operation at the tough of a button.
RPM and manifold pressure with full graphical depiction.
Full function fuel flow computer system.
Links to GPS for enhanced fuel management.
Full EDM scanner functionality.
Unit easily set to display in either portrait or landscape mode
Monitors: 4/6/7/8/9 cylinder engines, Turbocharged engines, RPM, MP, %HP, IAT, CDT, OAT, CAT, OIL P, OIL T, CHT, EGT, VOLTS, EGT, DIF, CLD, F FLOW, F USED, F REQD, F ENDUR, F REM

Eligibilities

Functions

Included Functions

EGT 4 or 6 Probes
CHT 4 or 6 Probes
Volts
Shock Cooling
Span (highest to lowest EGT)
LOP/ROP JPI Exclusive Leaning Mode
Power Connector
EGT/CHT Harness
EZTrends
Data recording - 100 hrs Download USB 1 GB Memory Stick
Selectable Positions for Linear gauges
3 year warranty

Optional Functions

Fuel Flow
Oil Temperature
Oil Pressure
OAT
TIT
CDT
IAT
CARB Temperature
RPM
MAP
% HP

Арт.	MPN	Описание	Цена
10-06946	EDM-730-4C	JPI EDM 730 4C CHT BAYONET PROBES	$ 1 568
10-06948	EDM-730-4C 231	JPI EDM 730 4C W/FF 231 CHT BAYONET PROBES	$ 1 959
10-06951	EDM-730-6C 201	JPI EDM 730 6C W/FF 201 CHT BAYONET PROBES	$ 2 595
10-05181	EDM-730-7C 201	JPI EDM 730 7C W/FF 201	$ 2 720
10-05198	EDM-730-8C 231	JPI EDM 730 8C W/FF 231	$ 2 799
10-03701	EDM-730-4C	J.P. INSTRUMENTS EDM-730 ENGINE MONITORING SYSTEM	$ 1 559
10-03718	EDM-730-4C 231	JPI EDM 730 4C W/FF 231 W/ 1 CHT ADAPTER PROBE	$ 1 959
10-03719	EDM-730-6C 201	JPI EDM 730 6C W/FF 201 W/ 1 CHT ADAPTER PROBE	$ 2 595
10-05180	EDM-730-7C	JPI EDM 730 7C	$ 2 305
10-05184	EDM-730-8C 201	JPI EDM 730 8C W/FF 201	$ 2 799
10-06947	EDM-730-4C 201	JPI EDM 730 4C W/FF 201 CHT BAYONET PROBES	$ 1 959
10-06949	EDM-730-6C	JPI EDM 730 6C CHT BAYONET PROBES	$ 2 179
10-06952	EDM-730-6C 231	JPI EDM 730 6C W/FF 231 CHT BAYONET PROBES	$ 2 595
10-05183	EDM-730-8C	JPI EDM 730 8C	$ 2 385
10-05186	EDM-730-9 231	JPI EDM 730 9C W/FF 231	$ 3 965
10-03717	EDM-730-4C 201	JPI EDM 730 4C W/FF 201 W/ 1 CHT ADAPTER PROBE	$ 1 959
10-03703	EDM-730-6C	JPI EDM 730 6C W/ 1 CHT ADAPTER PROBE	$ 2 185
10-03720	EDM-730-6C 231	JPI EDM 730 6C W/FF 231 W/ 1 CHT ADAPTER PROBE	$ 2 595
10-05182	EDM-730-7C 231	JPI EDM 730 7C W/FF 231	$ 2 720
10-05187	EDM-730-9C	JPI EDM 730 9C	$ 3 627

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

What are the unit's dimensions for the JPI EDM 730/830?

The JPI EDM 730/830 is 3.1"W x 4.2"H x 3.0"D without connectors and wire. Also note that this gauge (3-1/8” mounting hole) can be mounted up, down, right and left. For more information please see our videos tab.

What accessories are required for fuel flow, Garmin 530W integration, RPM and MAP.

The JPI EDM 830 comes with this in the box or you can order the options for fuel flow, RPM and MAP found on the accessories tab.

Are there any differences between 730 and 830 cores? Can I initially buy the 730 and afterward add other sensors to get ability of 830?

You can purchase a JPI 730 first and later add any/all the engine features of the JPI 830.

I am from Brazil, is the JPI Instrument EDM 730 certified from the FAA to be installed at PA28A?

Yes, the JPI EDM 730 and 830 are FAA certified (TSO'd) engine monitors. Please note they are secondary monitors (meaning you will have to keep your existing engine gauges and probes).

Are all CHT and EGT probes, fuel flow and complete wiring harnesses included in the EDM-730 box?

Yes, based on which version you select (4 or 6 cylinders) you will get that many probes for EGT and CHT. You will also get fuel flow if you select the option.

Can I add %HP to the EDM730?

Percent horsepower is one of the options included with the EDM730.

Plan to install in a Cessna 172I with O-360-A1A with single probe EGT/CHT instruments installed. How do the single primary instrument probes and the 4 EGT/CHT 730 probes mount so that they all maintain their function.

JPI recommends using CHT sender part number 10-03689 to be used in conjunction with your existing senders. You can mount EGT probes next to existing probes with no problems.

What is the format of the USB Memory Stick? and what is the File Format -CSV or exl or PDF once it is loaded onto the computer? Reference:- Data recording - 100 hrs Download USB 1 GB Memory Stick

The file is saved as a FAT 32 4GB memory stick. It can be saved as a CSV file after loading to the computer.

I had a JPI 700 installed in my Socata TB200. I has been installed right from the beginning 1995. Now it does not work any more (blank). Can I replace it with a new EDM 700 or 730 or do I need new cables/connectors?

Per JPI. We can replace your display if it is bad. Yes, you can upgrade to an EDM-730 without needing to re-do wires and connectors. The upgrade is plug and play.

I have a FS450 fuel flow installed. Can I simply connect the transducer to a 730 or do I have to buy that option?

The fs450 transducer will work with the 730. If placing an order for a 730, select the fuel flow option without transducer.

Will the JPI EDM-730 work with the Rotax 912 factory oil temp and pressure sensors?

Yes, per JPI, this will work fine.

Is is possible to swap all six bayonet-style CHT probes included in the EDM 730 package for six M113 spark plug gasket probes? I have an engine setup that makes installing the bayonet-style probes prohibitive.

Yes this is possible you just need to specify which probes are needed at the time of the order so that we can special order this from the manufacturer.

Is the J.P. Instruments 730 approved as a primary display of manifold pressure with that option?

This unit is only approved as a secondary display.

Does The 740 basic includes oil temp and oil pressure? Or just oil pressure?

No, the EDM 740 does not include oil pressure and oil temp out of the box. They are add on options.

Will my FS450 interface with the EDM-730?

While you can use the same transducer for the EDM-730 as the FS450, the units cannot be interconnected.

Does the EDM 730 with fuel flow option for fuel pump item include the FFDM-1 or FFDM-2 option for aircraft with a fuel return line?

Per the manufacturer: When ordering the EDM 730 with fuel flow, upon request it will include a harness and therefore the Module is not needed.

Can the 4-cylinder version be used with a 6-cylinder engine by just purchasing additional probes and wires? Or is there a difference in hardware and/or software?

There is a difference in the amount of probes but the unit itself and software are the same.

I would like to ad the option, Carb temperature to my EDM 730. I need a carb temp kit. Please tell me the cost of the kit please

Use PART# 10-27103 for the EDm 730 carb temp option.

My IO-470-N has a tannis preheater. Which CHT probes are appropriate for the 730 ?

JPI offers gasket type and bayonet type probes. You will need to verify what your engine requires.