GARMIN G3X GPS 20A ADS-B SYSTEM

253 500
Арт.
11-13819
Описание

WAAS position source for ADS-B & ideal for your G3X/G3X Touch System

  • Rule-compliant, non-TSO’d GPS position source for experimental aircraft
  • Adds new capabilities for Garmin G3X and G3X Touch systems
  • Meets WAAS/SBAS position source requirements for ADS-B “Out”
  • Compatible with a wide range of 1090 ES transponders
  • Provides an economical path to ADS-B compliance
Designed to fit within the equipment budget and operating requirements of most experimental/amateur-built and light sport (LSA) aircraft owners, the GPS 20A provides a simple, self-contained WAAS position source that works with most
1090 ES transponders to meet the latest Federal Aviation Adminstration (FAA) rules for ADS-B “Out” compliance.

Using data from the worldwide GPS satellite network, the GPS 20A receiver generates precise information about your aircraft’s position, track and groundspeed. It then provides this information to your ES transponder’s “squitter” signal (via an RS-232 interface), which then broadcasts the data to the ADS-B ground station network for relay to ATC and other ADS-B “In” equipped aircraft in the surrounding airspace. This extended squitter technology allows your aircraft to automatically transmit more accurate and useful traffic surveillance data — including aircraft flight ID, position, altitude, velocity, climb/descent and heading information — to those tracking and controlling aircraft movements in ATC airspace. The extended squitter format can accommodate significantly more data elements than the basic Mode S transponder signal, so ADS-B system users are able to track each airplane’s flight path with much greater precision, accuracy and situational awareness.

Garmin G3X and G3X Touch package owners using the GTX 23ES transponder can easily install the GPS 20A by connecting a single RS-232 interface to provide compliant WAAS position data to the transponder for ADS-B “Out” — while providing a supplemental source of high-quality GPS guidance to their navigation and display systems. With these basic components, your system not only meets ADS-B “Out” requirements — but by simply adding an affordable GDL 39 portable or GDL 39R remote receiver, you can also access such ADS-B “In” benefits as datalink traffic with spoken audio alerts (“Traffic, Traffic”) and subscription-free U.S. weather, including animated NEXRAD radar, METARs, TAFs, winds and temperatures aloft, PIREPs, NOTAMs and more. As an alternative, the GDL 39 receiver with its built-in Bluetooth® capability can also wirelessly send this ADS-B traffic and weather data to your iPad® or other devices running Connext®-capable apps such as Garmin Pilot, as well as the aera 795/796 series of portables. So, you have lots of options for utilizing the free information link benefits of ADS-B in your GPS 20A-equipped cockpit.

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы
Will the GARMIN G3X GPS 20A ADS-B SYSTEM interface with iPad Garmin Pilot app?

No. The Garmin GPS 20A box does not connect to the iPad via the G3X, only the Garmin GDL 39 or GDL 39R will sedn the ADS-B signal to the iPad.

Does the GPS 20A come with an antenna? If not, which one would be required?

No. The GPS 20A does not come with a GPS antenna. You must order the GA 35, part number 11-09701.

Would this in conjunction with the GTX327, AK350, and GA35 antenna work to satisfy the 2020 mandate for ADS-B out?

No, as the GTX 327 is a Mode C and not a Mode S transponder. The GPS 20A is only for use with the G3X.

Is the GPS 20A necessary for ADS-B In and Out if I use the new GTX 345 transponder together with the G3X system?

No, the GTX 345 is a stand alone ADS-B in and out box. You do not need the GPS 20A in this case.

Will the Garmin GPS 20A ADS-B System work with G3X and GTX327 only, as in and out?

The GPS 20A is ADS-B out only. For ADS-B in you will be required to have a GDL 39 or GDL 39R.

Will the G3X Touch, GPS 20A and the GTX 23 ES work together for compliance with ADS-B out requirements?

Yes, all units listed will work together. You will need a GA 35 antenna to be ADS-B compliant. This can be found under p/n 11-09701.

Can the Garmin GPS 20A ADS-B system be used as a compliant WAAS GPS source to feed data to a Trig TT22 1090es transponder?

Yes, if used in a G3X system the GPS 20A and TT22 along with the GA 35 antenna will make you ADS-B compliant.

What kind of antenna connector do I need on the end of the coax cable to connect with the GPS 20A ( male/ female, BNC/ TNC)?

The coax cable will have a BNC male connector to connect with the GPS 20A.

Will the GPS 20A work in conjunction with a Garmin mode C transponder as ADS-B out?

The GPS 20A is only intended for use with the Garmin G3X system on experimental aircraft. It is not designed as a standalone unit.

Will the G3X (NOT Touch), GPS 20A and the GTX 23 ES work together for compliance with ADS-B out requirements?

For ADS-B Out requirement, you would need GTX 23ES + GPS 200A + GA 35. For ADS-B IN, the GDL 39 OR 39R will be needed.

Does the GPS 20A include a secondary NEMA RS-232 output to serve as a position source for another device, such as a 406 ELT?

The Garmin GPS 20A does have a second RS-232 output which provides the following: RS-232 TX 2 is always configured to provide NMEA out at 9600 baud, 1 start bit, 1 stop bit, 8 data bits, and no parity. The supported NMEA sentences are GPRMC, GPGGA, GPGSA, GPGSV, GPVTG, and PGRMT.

I have a Garmin GDU 375, Gdl 39, and a Becker 6401 mode S ES transponder. Will the 20a work with my system and provide 2020 compliance?

The gps 20a is compatible with both the gdu 375 and the becker 6401. If your becker 6401 is the -1 version you will meet the mandate, the -2 version will not. Please verify the becker part number.

Will the G3X GPS20A connect to the Trig 22 transponder to provide a position source?

Yes, it will connect via a RS-232 line.

Does the Garmin GPS20A meet the requirements of TSO C-154c specification, in order to be used as a compliant position source?

It is a rule-compliant, non-TSOd GPS position source for experimental aircraft.

Will this Garmin G3X GPS 20A work with a MGL iEFIS and Sandia transponder?

No, this unit will only work with the G3X.

My Trig TT22 Transponder required a certification level for the GPS source. What level should I use when using the GPS 20A as the GPS source.

Although the GPS 20A will work we recommend using the TN70 with the TT22.

Is the gps20a compatible with the garmin GA56 low profile antenna

It is not compatible with the ga56, but is compatible with the ga35 low profile waas gps antenna. The gps20a must have a waas gps antenna.

I have a GTX 345 WITHOUT internal GPS, will the garmin GPS 20A ADS-B work as a GPS source for the GTX 345 Transponder?

The GPS 20A can be used as an approved WAAS GPS source with the GTX 345 on an experimental aircraft. The GPS 20A is not a certified unit, and as such cannot be used in certified part 23 aircraft.

Would this Garmin GPS 20A work in conjunction with the GTX330ES and GA35 antenna work to satisfy the 2020 mandate for ADS-B out?

The GPS 20A cannot be used as a GPS source the the GTX330ES as that unit is made for the G3X system that is controlled by the GDU display.

Will the GPS20A work with the Honeywell KT-74 Mode S transponder?

We do not have compatibility information between these two manufacturers.

Will the Garmin GPS 20A work with the GTX 45R to give me ADS-b in and out? And is the GA35 antenna all that I will need if I am going to go with XM weather also?

The GA 35 will not receive XM signals, only WAAS GPS. The GPS 20A can be used as a WAAS GPS source in experimental installations.

Is the G3X gps 20A compatible with a Garmin GTX 327 transponder and if so does it require another antenna?

The GTX 327 is not an ads-b compatible transponder. As such, it will not work with the GPS 20A. Please see the Garmin GDL 82 for a compatible ADS-B solution when paired with the GTX 327.

Is the coax cable needed to connect the GPS 20A to the antenna included or sold seperately?

The coax cable is sold separately and will have BNC male connector to connect the GPS 20A.

Will the GPS 20A work as a position source for the Stratus ES transponder?

The coax cable is sold separately and will have BNC male connector to connect the GPS 20A.

Will the GPS-20A work with the GA37 antenna so I can use the XM side of the antenna for a separate XM receiver?

The GA37 is an acceptable form of WAAS GPS for the unit.

i have a garmin gtn 650 and a g3x touch, what do i need to be adbs out compliant?

All that is needed is a transponder to be ADS-B Out capable. An example of this would be a GTX 335 without internal GPS.

Can I use the G3X Touch built in waas GPS for adsb or do I need to buy a 20a?

The GDU GPS receiver does not meet the TSO GPS requirements, thus it is not sufficient to provide position data to a transponder for ADS-B Out compliance.

Will this work with a Garmin GTX 328 mode S transponder?

No, this is not meant to be used with that transponder.