FLIGHTLINE 760A PANEL MOUNT COM RADIO

217 500 ₽

Описание

The FL-760A is extremely small and one of the lightest radios in the industry at just under 1 lb in weight (replaces the FL-760). It provides a frequency range of 118 to 137 MHz with a 5 watt transmitter and 11 - 33 volt power supply. The built-in 2-place VOX intercom is sensitive and perfect for small aircraft cockpits. Users can switch between frequencies with the "flip/flop" option or use scan mode to sift through 32 programmable frequencies; additionally, there is a single button relegated to the 121.50 emergency frequency only. The FL-760A now offers updates to the original: Push-to-Talk (PTT) feature and audio inputs are separate for pilot and co-pilot. Also, intercom, VOX, volume and mic gain adjustments are now conveniently programmable from the front panel. This transceiver is ideal for noisy cockpits providing very clear reception, minimal squelch, and clear output.

Features

Built-in 2-place VOX intercom
Easily select channels via the 32 programmable memory channel call-up, emergency button, or scan function
Not plug compatible with certain features (power and ground are plug compatible)
Separate PTT and audio inputs for pilot and co-pilot
Intercom, VOX, volume and mic gain adjustments are programmable from front panel
Less than 1 lb in weight
Backlit display for easy reading
Pilot can select the receive notification LED color via the front panel

Documents

FL-760a.pdf

Арт.	MPN	Описание	Цена
11-16668	ASA-00001-SU	FLIGHTLINE FL 760A KIT W/ 2 PLACE EXP 4FT WIRE PIGTAIL	$ 897
11-14280	FL-760A	FLIGHTLINE 760A PANEL MOUNT COM RADIO	$ 725
11-16669	ASA-00002-CU	FLIGHTLINE FL 760A KIT W/ EXP CUSTOM WIRE PIGTAIL	$ 928

Отзывы Оставить отзыв

Отзывы ещё не добавлены

Вопросы и ответы

When building the custom wire harness for the Flightline FL-760A they want to know the length to Memory Change. What is this?

Memory change is an optional switch that can be installed in the panel to switch frequencies. If you do not plan on installing this switch, please write N/A for the length.

Can the Flightline 760A handle 8.33 khz channel spacing?

No, 25 kHz spacing only.

What noise filter should be used with the Fliteline 760A radio?

The manufacturer recommends using shielded audio leads for noise reduction. If this does not work, you can try part number 11-08055.

I am just making sure the 760a has a voice activated intercom as I've read in a separate review it does not. I'm wondering if this was true or possibly an installation error?

Yes, voice activated intercom is standard. It can also be wired to a push to intercom configuration for noisy cockpit environments.

What antenna is recommended for the Flightline 760a? Make, model ?

AV-10 for top mount, AV-17 for bottom mount.

Does the voice activated intercom have sidetone? (ie. can you hear yourself?)

Yes, the sidetone is adjustable.

Is the wiring harness included in the box with the Flightline 760A Com Panel Mount radio, part # 11-14280?

No, this can be ordered with or without the wiring harness. When you add the item to your shopping cart, you will be presented with two harness options, the first is a standard 3 ft harness with jacks (part # 11-14184), and the other is a customer harness in which you will be asked to provide your custom lengths (part # 11-14281).

What are the dimensions of the Flightline 760A panel mount com radio? How much added room is needed for the connectors in the back?

The FL-760A dimensions are:

2.4 x 2.4 x 6.26 inches. Add 2 inches for connector clearance.

Does this Flightline 760A radio have a speaker outlet?

The unit can be wired for speaker output.

Is this Flightline 760A radio TSOd for certified aircraft?

This radio is not TSO'd and is intended for experimental aircraft installations.

Will the Flightline 760A fit in a 2-1/4 inch round cut-out?

Yes, it will.

What are the transmit and receive power requirements for the FL-760A radio? (12 Volt)

This radio consumes 36w (max) during transmit and 9.6w during receive. On standby it consumes 3.6w.

Does this Flightline 760A panel mount com radio come with mounting hardware?

Yes, this includes 4x 6-32 screws for mounting, as well as the necessary female D-SUB-15 connector.

What size in amps circuit breaker should be used when installing this Flightline 760A panel mount radio?

A 3 amp fuse or circuit breaker is recommended by the manufacturer.

is the wiring harness for the 760A interchangeable with the earlier model 760? Or possibility would you have a 760 harness available?

No, the two harnesses are not interchangeable and we can no longer product the harness for the 760.

What kind of coax connector do I need to connect to this Flightline 760A radio?

You will need a male BNC. Part # depends on the type of coax cable you have.

To what standard was the radio manufactured to meet such as Radio Technical Commission for Aeronautics or does it meet the requirements of a recognized standard such a TSO

You can find this information in the installation manual found in the documents tab. You can find this under the READ ME FIRST section.

Can this Flightline 760A radio be wired to use my current intercom system?

Yes, this radio can be used with existing intercoms.

Can this Flightline 760A radio be used to replace a Microair M760N radio (using existing harness)?

No, it is not a slide-in replacement. It requires a complete new installation.

Will this Flightline 760A radio work with antenna 11-04261?

Yes this antenna should work with the 760A. Keep in mind that this would be for experimental aircraft only.

Does the FL-760A have a PTT switch?

A separate switch will need to be wired in for it to have this function.

When this Flightline 760A is ordered with the 2 place harness option, will it include all the jacks needed for plugging in the headset (2 places with aviation headset connector), external inputs ( music) and ptt switch?

The harness will come with the jacks for input and output attached. It will include the wires for the ptt switch, but the physical switch is not included.

I just bought the AVT-4 RAMI AVT-4 COM ANTENNA, will this work with this FL 760A radio?

Yes, this will work with your com.

Is the FL760A mono or stereo output ?

This is a mono system.

Does the flightline 760A work with David Clark H10-30 headsets? Or is a microphone amplifier required? I dont fully understand the requirement of powered vs non-powered microphones with respect to regular GA headsets.

Yes that headset would work as they are both mono systems.

I have David Clark H10-20 General Aviation headsets with M-7A Electret microphones will they connect correctly to 760A?

Yes, your headset will work with this radio.

Can this Flightline 760A radio monitor a second frequency? Or can you scan while you have a primary frequency in the radio to transmit on?

With this radio, you can have an active frequency and a standby frequency. You cannot monitor the frequency on standby.

Does the radio only option come with the D-sub connector and pins?

Yes, it will have those items.