GUARDIAN IFDR PANEL iPAD AIR/PRO 9.7-IN PANEL MOUNT

iFDR Panel Mount Package for Apple iPad Air, Air 2, Pro 9.7-in, and iPad (2017). For Both FAA Certified and Experimental Aircraft - Includes Panel Mount, 250-301 2.7 Amp Power Supply to Power Mount Plus Add a Single Panel USB Port, Lightning Cable, and 3.5mm Audio Cable

Full Package Includes:

• iFDR Panel Mount for iPad Air / Pro 9.7-in
• iFDR USB Power 250-101 2.7 amp Power Supply with a Single USB-A Port (Powers Mount and USB Port)
• Apple MFi Lightning Cable with Open Wire Termination
• 3.5mm Audio Cable with Open Wire Termination
• D-Sub 15-pin Solder Connector
• D-Sub Cable Shield

The iFDR Panel Mount Package for Apple iPad, iPad Air 1-2, and iPad Pro 9.7-in is a flush mounting system to easily dock and seamlessly integrate your existing iPad Air, Air 2, Pro 9.7-in into your aircraft instrument panel, giving it a clean, professional appearance in an easy to view position! Once installed, the iFDR mount allows your iPad to be docked in seconds, fully powered and ready for use, and able to be removed in seconds when done!

This package gives you the mount along with a panel mounted single 2.7 amp USB-A port that also features a hard-wired 2.7 amp connection from the rear to power the iPad mount! This way you can provide power to an external component like a phone or GPS/ADS-B receiver while keeping your iPad charged! Choose from a Single USB Round Faceplate or Single USB Square Faceplate.

The package also includes the Lightning cable to power the iPad, a 3.5 mm audio cable with an open-wiring termination to hard wire to an audio panel as well as the 15-pin D-Sub connector to solder power in/out and a D-Sub cable shield.

Compatible with all models of the 9.7-in iPad model including the 2017 iPad, iPad Air 1-2, and iPad Pro 9.7-in, the iFDR Panel Mount allows you to transform your new or existing panel and use the midsize iPad considered to be the best for use in the cockpit, fully integrated with your instrument panel. Your charts and approach plates are in easy sight for reference and you can even use your iPad as a small multi-function display with the many popular iOS aviation apps available.

All iFDR Panel Mounts and Power Supplies from Guardian Avionics are approved for installation in certified aircraft and rotorcraft under 14 CFR Part 23, 27 and 29 as "Non-Required Safety Enhancing Equipment" (NORSEE) as outlined in FAA memorandum number PS-AIR-21.8-1602. Mounts and power supplies may be installed as a minor alteration.

Designed for General Aviation in mind.

The iFDR Panel Mount for iPad, iPad Air 1-2, and iPad Pro 9.7-in was designed by aerospace engineers to perform in the unique environment of the cockpit. The spring actuated mounting cradle securely holds the iPad in place during the roughest of turbulence. The clean, flush mount has a shallow chassis allowing it to be easily installed in even the smallest of instrument panels. Built-in ports for the included Apple Lightning cable and 3.5mm audio cable in the package will keep cables safely and securely positioned behind the panel, allowing you the ability to connect to power, data, and audio without the cord mess.

Packaged with iFDR Power 250-101 Power Supply

The iFDR Panel Mount Package for iPad, iPad Air 1-2, and iPad Pro 9.7-in includes the Power 250-101 Dual 2.7 amp Power Supply to provide power to the mount and your iPad Mini along with a USB-A port in the panel! The iFDR Power 250-101 converts all aircraft voltages from 9 to 48 volts (including common 12, 14, and 24 volt systems) and transforms it to 5 VDC at 2.7 amps (12 watt) to keep your iPad, iPad Air 1-2, and iPad Pro 9.7-in powered and charging through all phases of flight as well as another product via the panel port.

Keep it cool.

As they are being used, iPads generate heat that can affect performance, resulting in a high-temperature shut down when you might need it most! Pilots have found this out the hard way when using a temporary mounting solution like Velcro to attach their unit to the instrument panel. The iFDR Panel Mount was designed with cooling in mind. Each mount has a 5/8-in tapered hose / tube port built-in, allowing you to attach it to a standard avionics cooling fan. Each panel mounting tray features cooling channels to circulate air behind your iPad to keep it cool even under the heaviest of use.

Simple installation.

The iFDR Panel Mount is designed for easy installation in your panel. Each durable molded ABS plastic unit is self-contained and mounts with only four screws. Our installation drawings give you the exact panel cutout details and screw positions in either PDF or AutoCAD DXF for precise cuts. The iFDR Panel Mount for iPad Air / Pro 9.7-inch requires a 9.485" long and 7.057" high panel cutout and can be mounted either horizontally or vertically.